Genuine Royal Enfield Brake Fluid DOT-4 (100ml) – Premium High-Boiling Hydraulic Brake Oil (Advanced Anti-Vapor Lock Formula | Direct OEM Part No: 3600004)

Advanced Vapor-Lock Prevention: Engineered with an incredibly high dry boiling point to resist thermal breakdown and prevent spongy lever action under severe braking.

Superior Moisture & Rust Inhibitors: Formulated to neutralize moisture absorption from the air, preserving hydraulic integrity and stopping corrosion in internal master cylinder walls.

Optimized Viscosity Architecture: Delivers precise, immediate pressure transmission from the handlebar lever down to the brake calipers for sharp, predictable biting power.

ABS and Dual-Channel System Friendly: Low-viscosity fluidity behavior ensures instantaneous feedback cycles required for modern dual-channel ABS modulators.

Preserves Internal System Seals: Fully compatible with factory-fitted rubber O-rings, fluid cups, and dust boots, preventing premature cracking, swelling, or leaking.

Perfect 100ml Workshop Pack: Eliminates product waste by providing exactly enough volume for a standard front and rear reservoir change out.

Ensure High-Thermal Stability and Crisp Braking Feedback on Every Terrain

Riding your motorcycle with dark, contaminated, or moisture-laden brake fluid compromises your stopping distances and endangers your safety. Across Royal Enfield’s iconic motorcycle lineup, hydraulic disc brake systems bear immense pressure due to heavy chassis weights and intense touring environments. Under continuous braking—such as descending steep mountain switchbacks or navigating tight city traffic—the extreme kinetic heat generated at the brake pads can easily boil low-grade or aged fluid. This boiling creates pocket bubbles inside your hydraulic lines, resulting in a terrifying loss of pressure known as vapor lock, causing your brake lever to collapse limply against the handlebar.

Our premium Royal Enfield Brake Fluid DOT-4 100ml (Part No. 3600004) provides the precise factory-certified chemical composition required to keep your braking system performing optimally. Formulated with advanced high-boiling synthetic oils and polymers, this fluid maintains an exceptionally high dry boiling point to effectively eliminate brake fade even under grueling conditions. Packed with high-performance anti-corrosion additives, it forms a protective layer over your calipers, internal metal alloy lines, and rubber piston seals. This blocks out harmful moisture and prevents rust formation. The streamlined 100ml bottle is perfectly portioned for routine master cylinder top-ups and minor flushes, ensuring you use fresh fluid every time without leaving leftovers to degrade in your toolkit.

Important Usage Instructions:

Never Mix with DOT 5: This glycol-based DOT 4 fluid is fully compatible with DOT 3 or DOT 5.1 systems, but must never be mixed with silicone-based DOT 5 fluids. Doing so will cause instant fluid gelling and completely lock up your brake lines.

Protect Painted Bodywork: Avoid spilling brake fluid onto your motorcycle’s fuel tank or side panels, as the chemical structure can quickly corrode and strip painted finishes. If a spill occurs, rinse immediately with plenty of soap and water.