Castrol Activ Scooter 4T 10W-30 Engine Oil (800ml) - SKU: CAS4TE1
for 24h dispatch, balance on delivery.
Available on Credit Cards across leading banks.
Check Delivery Speed & Date
Guaranteed Fitment
Product Description
Improved Actibond™ Technology: Protective molecules cling to internal engine surfaces even when the engine is switched off, providing strong wear protection during critical cold starts.
Synthetic Technology Formulation: Engineered to resist thermal breakdown and viscosity loss in hotter-running BS6 and BS4 scooter engines.
API SN & JASO MB (4-AT) Certified: Specifically formulated for 4-stroke gearless automatic scooters with dry clutches to minimize internal drag and support fuel efficiency.
Cleaner Engine Internals: Helps combat sludge and carbon deposit buildup around pistons and rings for consistent throttle response.
Standard 800ml Service Pack: Convenient 800ml bottle with an easy-pour red spout cap matches the exact sump capacity of most 100cc–125cc scooters.
Keep your automatic gearless scooter running cooler, cleaner, and smoother in stop-and-go city traffic with Castrol Activ Scooter 4T 10W-30 Engine Oil (800ml) - SKU: CAS4TE1. Because scooter engines are enclosed inside body panels and operate continuously at higher RPMs, they run significantly hotter than standard motorcycle engines. Formulated with Synthetic Technology and Improved Actibond™ molecules, Castrol Activ Scooter 10W-30 clings firmly to critical engine parts to deliver continuous protection across start-up, high-temperature riding, and engine-off parking phases.
Using standard motorcycle wet-clutch oil or degraded mineral oil in a gearless scooter increases internal drag, accelerates heat breakdown, and causes sluggish acceleration. Servicing your scooter with the CAS4TE1 Castrol Activ Scooter 4T 10W-30 800ml pack ensures crisp throttle pickup, lower operating friction, and dependable long-term engine protection.
Recognizing Engine Oil Degradation Symptoms
Excessive Heat & Vibration: Noticeable heat radiating near the seat or floorboards alongside rougher engine vibrations during city traffic crawls.
Sluggish Acceleration & Low Mileage: Delayed throttle response and drop in fuel efficiency caused by thinned-out, oxidized oil increasing internal friction.
Hard Cold Starts & Rough Idling: Engine cranks longer in the morning or idles unevenly due to poor film retention on cylinder walls.
Dark, Gritty, or Low Dipstick Level: Oil appearing pitch-black, smelling burnt, or dropping below the minimum dipstick mark between service intervals.
Maintenance & Service Best Practices
Warm Engine Before Draining: Run the scooter at idle for 2–3 minutes before opening the drain bolt so warm oil carries out suspended sludge and metal particles cleanly.
Inspect Drain Bolt Washer & Strainer: Clean the oil strainer screen and check the drain plug crush washer before refilling with 800ml of SKU CAS4TE1.
Verify Dipstick Level Correctly: Check the oil level on the center stand on flat ground without screwing the dipstick thread in (or as specified in your owner's manual) to avoid overfilling.
Technical Specifications
| Product Type | 4-Stroke Automatic Scooter Engine Oil |
| Brand / Line | Castrol / Activ Scooter (4-AT) |
| SKU / Part Number | CAS4TE1 |
| Viscosity Grade | SAE 10W-30 |
| Base Oil Technology | Synthetic Technology (with Improved Actibond™ Technology) |
| Industry Specifications | API SN, JASO MB (4-AT) |
| Net Volume | 800 ml |
| Compatibility | 4-Stroke Gearless Automatic Scooters (BS6 & BS4) |