Home > Castrol SAE 80W-90 API GL-5 Final Drive Transmission Gear Oil for Automatic Scooters (120ml, Part: CS80W9GO)

Castrol SAE 80W-90 API GL-5 Final Drive Transmission Gear Oil for Automatic Scooters (120ml, Part: CS80W9GO)

SKU: CS80W9GO
🔥 118+ bought in last month
-11% ₹85.00
Delivery Charges: ₹69
M.R.P.: ₹95.00
Free Shipping: On prepaid orders above ₹ 999/-
COD - Pay ₹99
for 24h dispatch, balance on delivery.
Easy EMIs
Available on Credit Cards across leading banks.

Check Delivery Speed & Date

Product Description

API GL-5 High-Load Protection: Specially engineered for scooter final drive gearboxes operating under heavy stop-and-go torque loads to prevent gear tooth pitting and scoring.

Multigrade SAE 80W-90 Viscosity: Maintains strong film thickness at high operating temperatures while ensuring smooth cold-start fluidity.

Reduced Gearbox Noise & Heat: Minimizes friction and heat transmission inside the compact rear gear housing for quieter, smoother acceleration.

Mess-Free 120ml Applicator Tube: Equipped with an extended, pointed nozzle tip that reaches tight scooter gear-fill ports directly without needing a separate funnel or syringe.

Exact Single-Service Quantity: 120ml volume matches the standard gear oil refill capacity of most 100cc–125cc automatic scooters.

Keep your automatic scooter’s final drive reduction gearbox running smoothly, quietly, and free from premature wear with Castrol Scooter 80W-90 Gear Oil (120ml) - SKU: CS80W9GO. While engine oil lubricates the combustion chamber, your scooter’s rear transmission gears rely on dedicated high-pressure gear oil to handle constant torque loads in city traffic. Formulated to meet stringent API GL-5 performance standards, this multigrade SAE 80W-90 lubricant forms a resilient cushioning film between gear teeth and bearings—preventing metal-on-metal pitting, reducing operating heat, and eliminating annoying rear-wheel whine.

Neglecting final drive gear oil changes—or topping up with thin engine oil instead of dedicated 80W-90 gear lubricant—causes rapid gear tooth wear, loud rear-wheel whining, and costly bearing failure. Servicing your transmission with the CS80W9GO Castrol Scooter 80W-90 120ml tube restores quiet gear meshing and extends the lifespan of your scooter's final drive.

Recognizing Gear Oil Wear & Failure Symptoms

Whining or Humming From Rear Wheel: A noticeable high-pitched whirring or grinding sound coming from the rear axle area as speed increases, caused by sheared-down or low gear oil.

Excessive Heat at Rear Gear Case: The aluminum gearbox housing near the rear wheel feels unusually hot after short city rides due to metal friction.

Milky or Water-Contaminated Drained Fluid: Creamy, emulsified oil draining from the gearbox after monsoon water crossings, indicating water ingress past breather hoses or seals.

Metallic Shavings on Drain Bolt: Fine silver metal dust accumulated on the gear drain plug, signaling accelerated gear tooth wear.

Maintenance & Service Best Practices

Drain Completely via Lower Plug: Remove both the upper fill bolt and lower drain bolt on the rear transmission casing after a brief warm-up ride so old fluid drains thoroughly.

Inspect Seal Washers: Check the aluminum/copper crush washers on both the drain and fill bolts before reinstalling to prevent slow oil weeping.

Clean Squeeze Application: Snip the tip of the 120ml CS80W9GO tube nozzle, insert it squarely into the fill port, and squeeze from the bottom upward until the required volume (typically 100ml–120ml per model spec) is filled cleanly.

Technical Specifications

Product Type Automatic Scooter Final Drive / Transmission Gear Oil
Brand / Line Castrol / Scooter Gear Oil
SKU / Part Number CS80W9GO
Viscosity Grade SAE 80W-90 (Multigrade)
Performance Standard API GL-5
Net Volume 120 ml
Packaging Type Flexible Squeeze Tube with Long Pointed Applicator Nozzle
Compatibility 4-Stroke Gearless Automatic / CVT Scooters (BS6 & BS4)
0